Specification |
Description |
Production Speed |
- 1-35 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
|
Load Capacity |
- Maximum load size to safely clear the tower: 56″ W x 56″ L (79″ load diagonal)
- Maximum load size to remain inboard of the turntable: 48″ W x 48″ L (68″ load diagonal)
- Maximum load height: 75″ H (plus up to 4″ top overlap)
|
Turntable |
- 48″ octagonal 5/16″ thick formed steel plate turntable
- 4 point caster support system
- Turntable height less than 11″ from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
|
Select Options |
- OAFS – Auto Film Start (Includes film holding clip & pendant start/stop station)
- OBFD – Broken Film/Out of Film Detection c/w Automatic Machine Reset and Fault Indication
- OCP2 – Cold Weather Package (down to 32ºF)
- ODP1 – Dusty Package
- OEB1 – 2 ft. Base Extension for Maximum 95″ Diagonal (Note: 71″ diagonal is standard)
- OEWH-110-S – Tower Extension for 110″ Wrap Height Capability (Note: Standard is 80″. All machines with tower extensions will be hinged and shipped knocked-down)
- OPABL – Beacon Light with Red & Green lens – (Indicates run, clear or fault conditions)
- OPSCLP-SW250 – SCALE PACKAGE (PLATFORM) – SureWeigh Platform Scale with GSE250 Digital Weight Indicator (Notes:
- OSCRMPP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)
- ORMP-S – Ramp for manual pallet jack loading – 48″ W x 60″ L
- OPE1-S – 24″ L x 48″ W Porch Extension for Powered Pallet Jacks
- OPE2-S – 40″ L x 48″ W Porch Extension for Powered Pallet Jacks
- OSCBI-250 – LOW PROFILE SCALE PACKAGE – Built-in Load Cells with GSE250 Digital Weight Indicator (Notes: SCBIRMP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)
- OSCBIRMP – Heavy Duty Scale Ramp for use with built-in load cells
- OSCRMPP – Complete 120″L x 48″W Heavy Duty Scale Ramp & Porch for use with platform scales
- OSSPK – Starter Spare Parts Kit
|
Film Carriage Elevator |
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
- Maintenance free carriage guidance system
|
Film Delivery System |
- NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
- Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage Descent Obstruction Safety Shut-Off Device
- Rapid Thread ™ Safety Door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
|
Electrical Input Requirements |
- 115 Volts 1 Phase 60 Hz 15 Amps
|