4100-35 FA Titan Ultra
A choice of five different frame variations are available allowing these systems to be tailored to suit specific floor space, material handling and wrapping requirements. Select from wall-mount (WM), post-mount (PM), free-standing rear mount (FSR), free-standing 3-post (FS3), and free-standing ‘U’-shaped (FSU) frame versions.
Description
https://www.youtube.com/watch?v=2MqJrMRAqcs&list=PLw60JQWF_qgb72rjdsyuJyEF1FM7kxv8N&index=22&t=2s
SPECIFICATIONS
Specification |
Description |
Production Speed |
- 1-35 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
|
Load Capacity |
- Maximum load weight: Unlimited (floor supported)
- Maximum load size: 50″ W x 50″ L (71″ max. load diagonal) x 86″ H (plus up to 4″ top overlap)
- Minimum load size: 24″ W x 24″ L x 24″ H
|
Rotary Arm |
- Double flange bearing support system
- Twin V-belt drive pulleys with belt tensioner
- 1-12 RPM rotational speed c/w soft start acceleration
- Final revolution deceleration and positive stop alignment
- 1/2 HP DC variable speed motor
|
Film Carriage Elevator |
- 1/2 HP DC variable speed motor
- Direct flat belt drive system
- Maintenance free 12 point carriage guidance system
|
Electrical Input Requirements |
- 115 Volts 1 Phase 60 Hz 15 Amps
|
FEATURES
Feature |
Description |
Automation Features |
- “All Electric – No Pneumatics Required”
- Electro-mechanically actuated film clamp mechanism
- Electro-mechanically actuated film tail cut/wipe arm mechanism
- Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
|
Control Features |
- PANASONIC PLC with Touchscreen Operator Interface
- Power Off – On – Reset Switch & Power On indicator light
- Single button Auto Wrap Cycle Start/Pause
- Cycle Pause for applying top sheets
- Reinforce Wrap control for mid-wrapping
- Emergency Stop button
- Rotary Arm Jog button
- Film Carriage Lower/Raise buttons
- Film Clamp Open/Close button
- Film tension (Force-to-Load) control
- Separate film carriage raise & lower speed controls
- Variable rotary arm speed control
- Triple beam auto load height sensing photo-eye, detects dark or shiny loads
- Separate 1 to 12 revolution top & bottom wrap control
- Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
- A – B – C Wrap Program selector with capability to input and store unique wrapping parameters for each program
- Pendant Start/Stop push-button station for remote operator control – optional lanyard or wireless remote control available
- Stack-light beacon indicates run, clear or fault conditions
- Rotary arm and film carriage elevator dynamic braking
- NEMA 12 control panel and junction boxes
- Dust tight slip ring assembly
- Non-proprietary UL/CSA approved components
|
Structural Features |
- All structural steel construction
- Integral structural steel wall/floor mounting stand
- Electro-static powder coated paint finish
|
Safety Features |
- Rotary Arm Obstruction Emergency Safety Stop Sensor
|