HP 3200 Platform Automatic (High Profile)
A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Description
https://www.youtube.com/watch?v=4StIYhsmE2s&list=PLw60JQWF_qgb72rjdsyuJyEF1FM7kxv8N&index=16&t=0s
SPECIFICATIONS
Specification |
Description |
Production Speed |
- 1-40 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
|
Load Capacity |
- Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static
- Maximum load size: 50″ W x 50″ L (71″ max. load diagonal) x 80″ H (plus up to 4″ top overlap)
- Minimum load size: 30″ W x 30″ L x 24″ H
|
Turntable |
- 52″ octagonal 5/16″ thick formed steel plate turntable
- 4 point caster support system
- Turntable height less than 12″ from floor
- ANSI #50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front & back forklift ports for easy movement
|
Film Carriage Elevator |
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
- Maintenance free carriage guidance system
|
Film Delivery System |
- NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
- Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage Descent Obstruction Safety Shut-Off Device
- Rapid Thread ™ Safety Door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
|
Electrical Input Requirements |
- 115 Volts 1 Phase 60 Hz 15 Amps
|
FEATURES
Feature |
Description |
Automation Features |
- “All Electric – No Pneumatics Required”
- Electro-mechanically actuated film clamp mechanism
- Electro-mechanically actuated film tail cut/wipe arm mechanism
- Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
|
Control Features |
- PANASONIC PLC with Touchscreen Operator Interface
- Power Off – On – Reset switch & Power On indicator light
- Single button Auto Wrap Cycle Start/Pause
- Cycle Pause for applying top sheets
- Reinforce Wrap control for mid-wrapping
- Emergency Stop button
- Turntable Jog button
- Film Carriage Lower & Raise buttons
- Film Clamp Open/Close button
- Film tension (Force-to-Load) control
- Separate film carriage raise & lower speed controls
- Variable turntable speed control
- Triple beam auto load height sensing photo-eye, detects dark or shiny loads
- Separate 1 to 12 revolution top & bottom wrap control
- Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
- A – B – C Wrap Program selector with capability to input and store unique wrapping parameters for each program
- Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available
- NEMA 12 control panel enclosure
- Non-proprietary UL/CSA approved components
|
Structural Features |
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes included for front and rear access
- Structural steel tube machine tower with sheet metal covers
- Electro-static powder coated paint finish
|