3300-CTA Conveyorized Automatic
A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.
Description
https://www.youtube.com/watch?v=k9POngdmJiA&list=PLw60JQWF_qgb72rjdsyuJyEF1FM7kxv8N&index=34&t=0s
SPECIFICATIONS
Specification |
Description |
Production Speed |
- 1-40 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
|
Load Capacity |
- Maximum load weight: 4,000 lbs dynamic – 12,000 lbs static
- Maximum load size: 48″ W x 48″ L (68″ max. load diagonal) x 75″ H (plus up to 4″ top overlap)
- Minimum load size: 30″ W x 30″ L x 24″ H
|
Turntable |
- 72″ diameter 3/8″ thick laser-cut steel plate with 5″ skirt
- Front and side cut-outs with UHMW flexible contouring for fork truck access
- 6-point heavy duty ball bearing caster support system
- ANSI # 60 direct chain drive c/w chain tensioner
- 3-16 RPM rotational speed c/w soft start acceleration
- 3/4 HP AC variable speed motor c/w turntable holding brake
- Final revolution deceleration and positive stop alignment
|
Film Carriage Elevator |
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
- Maintenance free carriage guidance system
|
Film Delivery System |
- NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
- Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage Descent Obstruction Safety Shut-Off Device
- Rapid Thread ™ Safety Door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
|
Power Roller Conveyer |
- Basic system includes: 72″ dia. powered Process/Turntable section & 5 ft. Gravity Outfeed section
- Turntable section includes:
- Chain driven live roller type conveyor
- Rated 4,000 lbs per section
- 2-1/2″ diameter 11 gauge rollers c/w 11/16″ hex axles on 3″ centers
- ANSI # 40 roller to roller chain drive
- 50″ effective roller width
- Conveyor speed variable up to 30 FPM with electronic soft start
- Pass-line height – 16-1/2″ from floor to top of rollers
- 1/2 HP AC variable speed motor
|
Electrical Input Requirements |
- 115 Volts 1 Phase 60 Hz 20 Amps
|
FEATURES
Feature |
Description |
Automation Features |
- “All Electric – No Pneumatics Required”
- Electro-mechanically actuated film clamp mechanism
- Electro-mechanically actuated film tail cut/wipe arm mechanism
- Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
|
Control Features |
- PANASONIC PLC with Touchscreen Operator Interface
- Power Off – On – Reset switch & Power On Indicator light
- Cycle Pause for applying top sheets
- Reinforce Wrap control for mid-wrapping
- Emergency Stop button
- Turntable Jog button
- Film Carriage Lower & Raise buttons
- Film Clamp Open/Close button
- Eject Load (Turntable Conveyor Jog) button
- Film Tension (Force-to-Load) Control
- Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
- Separate film carriage raise & lower speed controls
- Variable turntable speed control
- Triple beam auto load height sensing photo-eye, detects dark or shiny loads
- Separate 1 to 12 revolution top & bottom wrap control
- Gravity conveyor full photo-eye
- Broken film/out of film detection c/w automatic machine reset
- Beacon light indicates run, clear or fault conditions
- Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available
- NEMA 12 control panel enclosure
- Non-proprietary UL/CSA approved components
|
Structural Features |
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes included for front and rear access
- Structural steel tube machine tower with sheet metal covers
- Electro-static powder coated paint finish
|