LP 2100-SRT (Low Profile)
The 2100SRT is affordable and simple with more standard features than any other pallet wrapper in this price range. A quality machine built with quality components and supported by a local qualified distributor.
Description
https://www.youtube.com/watch?v=bOtp2QU1_wE&list=PLw60JQWF_qgb72rjdsyuJyEF1FM7kxv8N&index=17&t=0s
SPECIFICATIONS
Specification |
Description |
Production Speed |
- 1-35 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
|
Load Capacity |
- Maximum load weight: 4,000 lbs dynamic – 10,000 lbs static
- Maximum load size: 50″ W x 50″ L (71″ max. load diagonal) x 80″ H (plus up to 4″ top overlap)
|
Turntable |
- 57″ diameter laser-cut steel plate with surround deck protection
- Maintenance free – 42 roller bearing support system
- Turntable height 2.75″ from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Rugged surround deck for added protection, 3 sided loading and pit mounting
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
- Optional loading ramp 60″ long x 48″ wide complete with 10″ level porch area available
|
Film Carriage Elevator |
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
- Maintenance free carriage guidance system
|
Film Delivery System |
- NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
- Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
- 1/2 HP AC variable speed motor
- Fully electronic dynamic dancer corner compensation
- 33% to 313% fixed stretch capability
- Pre-stretch ratio variable using easy sprocket change
- Carriage Descent Obstruction Safety Shut-Off Device
- Rapid Thread ™ Safety Door with auto power cut-off switch
- Side mounted film carriage for operator convenience and safety
- Superior film-to-roller contact area
- Lifetime warranty on pre-stretch rollers
|
Electrical Input Requirements |
- 115 Volts 1 Phase 60 Hz 15 Amps
|
FEATURES
Feature |
Description |
Control Features |
- Electronic controls with LCD operator interface
- Power Off – On – Reset switch & Power On indicator light
- Single button Auto Wrap Cycle Start/Pause
- Cycle Pause for applying top sheets
- Reinforce Wrap control for mid-wrapping
- Base or Top Wraps First program
- Up Only or Up/Down wrap program
- Emergency Stop button
- Turntable Jog button
- Film Carriage Lower & Raise buttons
- Film Tension (Force-to-Load) control
- Separate film carriage raise & lower speed controls
- Operator programmable turntable speed control
- Triple beam automatic load height detection sensor for dark or shiny loads
- Separate 1 to 12 revolution top & bottom wrap control
- Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
- A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
|
Structural Features |
- All structural steel construction
- Forklift truck portable base structure design – lifting tubes included for front and rear access
- Structural steel tube machine tower with sheet metal covers
- Electro-static powder coated paint finish
|