Specification |
Description |
Production Speed |
- 1-30 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
|
Load Capacity |
- Maximum load weight: 4,000 lbs dynamic – 10,000 lbs static
- Maximum load size: 56″ W x 56″ L (79″ max. load diagonal) x 75″ H (plus up to 4″ top overlap)
|
Turntable |
- 48″ octagonal 5/16″ thick formed steel plate turntable
- 4 point caster support system
- Turntable height less than 11″ from floor
- ANSI # 50 direct chain drive c/w chain tensioner
- 3-12 RPM rotational speed c/w soft start acceleration
- 1/2 HP AC variable speed motor
- Final revolution deceleration and positive stop alignment
- Front and back forklift ports for easy movement
- Accu-Count exact turntable positioning system for additional film savings!
|
Film Carriage Elevator |
- 1/2 HP AC variable speed motor
- ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
- Maintenance free carriage guidance system
|
Film Delivery System |
- Stretch roller with manually adjusted caliper brake web tensioning system
- Standard 20” roll width, 10” diameter
- Carriage Descent Obstruction Safety Shut-Off Device
- Side mounted film carriage for operator convenience and safety
|
Film Capacity |
- Accepts all commercial films wound on 3″ diameter cores x 20″ width
- Accommodates damaged cores
|
Electrical Input Requirements |
- 115 Volts 1 Phase 60 Hz 10 Amps
|